• Architectural.
• Directional lighting.
• Flag poles.
• Pillars.
• Commercial applications.
• Gardens

• Lamp types - G12 Base.
• Construction - The body is of high pressure die cast aluminium, fastened with stainless steel screws.
  The body is powder coated in a standard grey other colors are available on request.
  Two stainless steel bolts hold the stirrup bracket to the body.
• Control gear - The choke, capacitor and ignitor(when required) are fastened to a removable gear tray in the gearbox.
  Power factor corrected >0.85
• Lampholder  G12.
• Front glass - 3mm heat tempered, impact resistant glass, fitted over a silicone gasket, to ensure a weatherproof seal.
• Electrical connection - A three way 15 amp connector block is provided in the gear compartment.
  A nylon compression gland allows access to the control gear. 
  All internal wiring 1mm silicone insulated.
• Reflector system - High purity aluminium, anodised and chemically brightened in narrow beam.
• Mounting versions - Standard fitting with stirrup bracket is suitable for mounting to a wall or frame.
  The fitting may be partially submerged in a garden for upward lighting of trees or building facades.
  Also available as an in ground up light version, complete with recessed box.

• Two-piece high pressure die-cast aluminium body
• All clips, screws and washers are manufactured from stainless steel
• The spigot bracket is high pressure die-cast aluminium
• The diffuser is heat tempered, impact resistant glass, sealed to the body by means of a silicone rubber gasket.

• Group A & B roads
• Car parks
• Office parks
• Security lighting
• Perimeter lighting

Lamp types

• 50W, 70W, 100W, 150W, 250W, 400W HPS
• 50W, 70W, 100W, 150W, 250W, 400W MH
• 125W MV
• 1 X 26W PL

Control gear

• The choke, capacitor and ignitor, when required, are mounted on a removable geartray which is fastened to the main body.
• All control gear is ISO approved

Lampholder

• E27 ES, E40 GES porcelain or PL

Electrical connection

• A 3-way 15A connector block is provided
• Access to the control gear is via a silicon grommet in the main body, thus ensuring the integrity of the ingress protection

• Lamp and ignitor compartments manufactured from high-grade pressed sheet aluminium, powder silver and sealed by means of anti-aging silicone gaskets. 
• Glass frame high-pressure die-cast from high-grade aluminium, powder-coated silver 
• high-impact heat-resistant glass 
• Stainless steel screws and clips 
• Hot-dip galvanized stirrup bracket with index for vertical indexing 
• Ignitor box for housing of ignitor, when required, or for use junction box.
• Manufactured according to  EN60598/1

• Stadium lighting 
• Large area lighting 

• Lamp types - single ended
  • 2000w Metal Halide 10.3A 380v tubular internally ignited
  • 2000w 10.3A 380v Metal Halide tubular externally ignited
  • 2000w 8.8A 380v Metal Halide tubular internally ignited 
• Lamp holder - E40 GES porcelain 
• Control gear - Housed separately in a high-grade aluminium housing
  • All control gear components are SABS/IES approved 
  • power factor correcteed > 0.85
• Reflector - Narrow beam high purity polished aluminium reflector systems 
• Electronic connection - Athree way 15amp connector block is provided in the control gear compartment 

• Aluminium body for long life and heat dissipation.
• An extremely weather-proof fitting - suitable for a variety of applications.
• Robust construction - 2 years guarantee on body.

• Security lighting.
• Garden Lighting.
• Facade lighting.
• Sign Boards
• Area Lighting 

• Lamp types - Hps - 70w,100w,150w
  • MV - 80w,125w 
  • MH - 50w,70w,100w,150w
  • PL - 18w,26w (single or double )
• Construction - All extternal screws nuts and washers are manufactured in stainless steel.
  • Stirrup bracket is powder coated mild steel
• Front glass - 3mm heat tempered, impact resistant glass, fitted over a silicone gasket.
• Control gear - The choke, capacitor and ignitor (when required) are fastened to a removable gear tray in the body.If requested a day night sensor is available. 
• Lampholder - PL lamp holder are made of PVC. The E40, E27 lamp holders are made of porcelain with a vibration spring to optimize the lamps life.
• Electrical connection - A three way 15 amp connector block is provided in the gear compartment.
  A nylon compression gland allows access to the control gear.
• Reflector system - High purity aluminium, anodised and chemically brightened in shinny or dimple finish. Beam spreads differ slightly between the various lamp options. 
• Mounting versions - Standard fitting with stirrup bracket is suitable for mounting to a wall or frame. An additional pole mounting bracket are available

• Aluminium body
• Robust and compact design
• Built-in tilt adjustment
• Low power consumption
• LUXEON Rebel LEDs (up to 100lm/W @350mA)
• High luminous flux
• High colour rendering index (Ra > 70)
• High durability (up to 60 000 hours)
• Compliance with EN13201 - 2:2003 (ME class)

LED colour temperature (CCT) available:

• Cool white: 5300K (typ.)
• Neutral white: 3950K (typ.)
• Warm white: 3000K (typ.)

• Street lighting
• Tunnel lighting
• Bridge lighting

Number of LEDs:

ROADLED60 - 30, ROADLED90 - 44, ROADLED120 - 60, ROADLED180 - 90

Number of cells:

 ROADLED60 - 2, ROADLED90 - 4, ROADLED120 - 4, ROADLED180 - 6

Arrangement:

ROADLED60 - 2 X 15, ROADLED90 - 4 X 11, ROADLED120 - 4 X 15, ROADLED180 - 6 X 15

Output power (W):

ROADLED60 - 52, ROADLED90 - 77, ROADLED120 - 105, ROADLED180 - 155

Initial flux (lm):

ROADLED60 - 3366 warm white, 4621 neutral white, 4719 cool white

ROADLED90 - 4893 warm white, 6681 neutral white, 6861 cool white

ROADLED120 - 6699 warm white, 9085 neutral white, 9405 cool white

ROADLED180 - 9894 warm white, 13348 neutral white, 13895 cool white

Final flux (lm):

ROADLED60 - 2827 warm white, 3882 neutral white, 3964 cool white

ROADLED90 - 4110 warm white, 5612 neutral white, 5763 cool white

ROADLED120 - 5627 warm white, 7631 neutral white, 7901 cool white

ROADLED180 - 8311 warm white, 11212 neutral white, 11672 cool white

• Aluminium body.
• Compact solution.
• Easy installation.
• High durability (>60.000H).
• Robust design (shock and vibration resistant).
• High efficiency.
• Low power consumption.
• High brightness.
• High colour rendering index (CRI>75%).

• Street lighting.
• Tunnel lighting.
• Bridge lighting.

• Number of LEDs: 
  URBANLED30   - 15, URBANLED50   - 25, URBANLED80   - 40, URBANLED110 - 55, URBANLED160 - 80.
• Number of cells: 
  URBANLED30   - 3, URBANLED50   - 5, URBANLED80   - 8, URBANLED110 - 11, URBANLED160 - 16.
• Arrangement: 
  URBANLED30   - 3 x 5, URBANLED50   - 5 x 5, URBANLED80   - 8 x 5, URBANLED110 - 11 x 5, URBANLED160 - 16 X 5.
• Pot LED (W): 
  URBANLED30   - 27, URBANLED50   - 45, URBANLED80   - 73, URBANLED110 - 100, URBANLED160 - 146.
• Initial flux (lm): 
  URBANLED30   - 2400, URBANLED50   - 4000, URBANLED80   - 6400, URBANLED110 - 8800, URBANLED160 - 12000.
• Final flux (lm): 
  URBANLED30   - 1800, URBANLED50   - 3000, URBANLED80   - 4700, URBANLED110 - 6600, URBANLED160 - 9000.
• Colour temperature: 
  bronco frio cool white.
• (K): (5300K)
• CRI: Ra>75
• Efficiency: 88%
• Optical efficiency (lm): 75%
• Uniformity (UO): >0,4
• Mean illumination (lux):
  
  URBANLED30   - 04m: 22,4 / 06m: 10 / 08m: 5,6 
  URBANLED50   - 06m: 16,5 / 08m: 9,2 / 10m: 5,9
  URBANLED80   - 06m: 26,2 / 08m: 16 / 10m: 9,5 
  URBANLED110 - 08m: 20,3 / 10m: 13 / 12m: 9 
  URBANLED160 - 08m: 23,6 / 10m: 15,1 / 12m: 10,4
   
• Effective illumination area (m²):
  
  URBANLED30   - 04m: 4 x 14 / 06m: 6 x 21 / 08m: 8 x 28 
  URBANLED50   - 06m: 6 x 21 / 08m: 8 x 28 / 10m: 10 x 35
  URBANLED80   - 06m: 6 x 21 / 08m: 8 x 28 / 10m: 10 x 35 
  URBANLED110 - 08m: 8 x 28 / 10m: 10 x 35 / 12m: 12 x 42
  URBANLED110 - 08m: 8 x 28 / 10m: 10 x 35 / 12m: 12 x 42

- Low wattage, high output LED light source,

- Dust and moisture proof,

- IP 66,

- High pressure die-cast aluminium trim ring, powder coated,

- Frosted opal high impact acrylic diffuser,

- Stainless steel cap screws, std or tamper proof,

- Robust construction, 20 year guarantee on aluminium body.

- Internal and external use,

- Wall or ceiling mount,

- Retail and commercial developments,

- Public and residential buildings.

CIRCUIT WATTAGE - 12w

LAMP TYPE - 32 X 0,375W OSRAM LED ARRAY

COLOUR TEMPURATURE - 4500K (neutral white)

DRIVER - 120mA

EFFICACY - 100lumen/watt

DIFFUSER - The high impact acrylic diffuser is fitted over a silicone gasket for protection against ingress of    moisture, dust and insects. The diffuser is frosted opal for optimum diffusion and uniform light output. The trim ring and diffuser are connected to the body by means of 3 captive stainless steel cap screws.

TERMINATION - A three way, 15 Amp connector block is provided inside the gear compartment. Supply access to the gear compartment is via a silicone grommet in the base.

GUARANTEE - LED lifetime expectancy - 5 years, Control gear (driver) - 3 years, Aluminium body - 20 years.

APPROVALS - SABS 60598 pending.